Precautions when using straight edge edging machine

[China Glass Net] The linear edging machine (straight edge machine, round edge machine, beveling machine) works by clamping the glass with the front and rear pressure plates and driving its linear motion for grinding. There are two points to note when using:

1 The front and rear pressure plates and the rail joint surface should be lubricated frequently, otherwise the normal service life of the machine will be affected by the premature wear of the front and rear pressure plates and the guide rail working surface. Although some models have automatic lubrication devices, it is also necessary to check whether the lubrication lines are unblocked;

2 When clamping the glass, the clamping force should be appropriate. Too loose affects the quality of the grinding. Too tight will increase the load of the machine, which is easy to produce jitter and creep. It is easy to crush the glass when grinding the thin glass. The clamping force can be tested on the machine with a slightly larger glass clamp, that is, the glass is clamped in the middle of the machine. When the machine is stopped, the two hands force the glass to move the glass, and it is suitable to adjust the clamping force to just when the hands are not moving.



Posted on